Learn what you should do when you set up your new Q.bo One robot for the first time with our tutorial ( pictures ).
- Register at our Forum to share ideas, make queries and discuss any issues with us and other backers. Registration of our forum can done at the following link: https://thecorpora.com/
community/ -
Download the latest version of OpenQbo onto your SD Card. However, do make sure that you have a backup the old version of OpenQbo in a separate SD Card before format your unit. The latest version of OpenQbo can be downloaded at the link below: https://thecorpora.com/openqbo/
-
HOW-TO How do I install OpenQbo OS image onto an SD card? https://thecorpora.com/howtoinstallopenqbo/
- Remove Screws from the Base | Connect a Monitor, Keyboard & Mouse ( do not remove the USB Camera cables from the Raspberry Pi )
- Insert your SD Card into the Raspberry Pi.
- Connect the main Power Supply and turn on your robot.
The first thing you must do is to connect to your network using Wi-Fi or Ethernet connection (at the top, right of your screen).
Note: It is suggested that you assign Q.bo One a fixed IP address in your router.
Once you’re connected to your network, run the “configQBO” program (right-click icon and select “Open”) from the desktop, then select the [Execute] option.
Select a “Language” (English or Spanish) and the “Start With” mode (Interactive or Scratch).
HOW-TO
